|
|
|
|
|
Apr 29 2006
Making the default Analog Nub better
PSP Guide | How To
|
chen
Birmingham, Alabama, USA
Go on! You know you want it
Read reviews & Check out new games
|
READ
|
DISCUSS
 Joytron PSP Sli...
 Pelican for Son...
 PSP IVO Sound M...
 DiGi iNVaDeRS
| |
If you are like me, and do not have one of the larger/better analog nubs for the PSP, then this is for you! It makes the analog more reactive and you can grip it better!
The only thing you need is some tape that is used for wounds. Like the stick tape used to wrap something. My tape is called 'Mueller Tape'.
• Cut out about 2 square inches off the tape.
• Then cut the tape into individual peices about .5 in by .5 in.
• Put one small piece of tape on the face of the analog nub.
• Then turn the nub upside down, and cut away all the extra tape.
• Repeat steps 3 & 4 to acheive desired height.
Notes
Do not press any tape down to cover the sides of the analog or the bottom. It will result in the analog nub putting sticking residue all over the area where it goes. The junk is hard to clean off the faceplate and the nub. Try not to go crazy and put too much tape on it. If there are more than 10 pieces, it will not fit inside most case very well. I used 7 and it works great. (5 MM high)
When I played SOCOM again, I noticed that I did not lose my grip on the analog anymore. It seemed that I played better. Don't bother using scotch tape or duck tape because those are even more slippery than the normal nub. The only thing bad about this is that it looks somewhay ugly on the PSP, but I don't mind.
| |
Comments
05/02/06
1 
jdfrag
| California USA | SOCOM: BlackShark
nice little bit....ill give it a try.....thanks chen
+
05/03/06
20
chen
| Alabama USA | SOCOM: ll_MaFiA_ll
05/10/06
1
DracoEX
| Alabama USA
can you give a pic to further explain of what it looks like?
+
05/19/06
3
johnjames104
| Iowa USA
would electrical tap work?
+
07/15/06
4
Vespacian
| New York USA
Hmmm, interesting.
You probably could take a band-aid, cut the adhesive sides off, stick as many as you need, and when you're done, color the adhesive so it somewhat "matches" your PSP.
Just a thought.
PS: I think elec tape should work
+
07/28/06
Jallaker
| Michigan USA
I dont think electrical tape would work because it doesnt stay the best plus it can be slippery too. But it is worth a try.
+
register / login
|
PSP411 | Top
PSP411.com is not an official site affiliated with Sony in any way.
Content and graphics Copyright 2004-2008 PSP411.com
All rights reserved. | Contact | RSS
|
